How To Use Anti-Decubitus Air Mattress？

How to use anti-decubitus air mattress

1. The air bed can be inflated immediately after the purchase, but it can be used after 8 hours (preferably 12 hours) after the first inflation, because a buffering process is required for the straps and seams in the air bed; use it 2 days before the new bed, Try not to be out of breath.
2. Lay the air cushion flat on the bed, cover the surface with a sheet, and connect the two inflatable pipes on the air cushion to the mouth of the main inflatable pipe.
3. When ready to inflate. The anti-decubitus pad should be flat, and the mattress can be inflated before it can be used normally. Generally, the first inflation time is about 30 minutes.
4. Check whether the pressure of the air pump is increased; check whether the tracheal joints under the mattress are well connected to maintain normal inflation.
5. Turn on the power, turn on the power switch, and the host starts to work. When using for the first time, turn the inflation strength switch clockwise to the "strong" position.
6. At night or when the patient feels a strong change in air pressure, the switch can be rotated counterclockwise to a weak inflation state.
7. Because the winter is relatively cold, a thin mattress can be placed on top of the bedsore prevention and treatment mattress to keep warm and warm.
8. Mattress inflation can be continuously inflated for 24 hours while the patient is lying on the bed.

Anti-decubitus air mattress precautions

1. When preparing to inflate, the mattress should be flattened. Note that there should be no sharp objects on the surface of the mattress and the sheet to prevent the mattress from being punctured.
2. When inflating, first check whether the pressure of the air pump is increased, and whether the extension rubber tube of the mattress is cut with scissors, so that it can be easily matched with the air outlet of the air pump.
3. Check whether the tracheal joints under the mattress are well connected to keep the inflation normal.
4. Pay attention to pressure control when inflating, and can not exceed the maximum pressure to prevent the airbag from being inflated due to excessive pressure.
5. Pay attention to keep the mattress clean and hygienic, often use neutral detergent to clean the surface, and pay attention to acid and alkali resistance. Store in a dry and ventilated place, pay attention to moisture.
6. After one-time inflation, the air bed will be a little loose. This is a normal phenomenon. The material of the air bed is somewhat elastic. Don't get too full.
7. One person can use enough gas, and two people use it to let out some gas; the temperature rises in the seasonal change, and the gas in the bed expands, pay attention to deflation.
8. When the temperature drops, the bed will become soft, pay attention to air supply; any inflatable products (including tires) will naturally leak air, which is a normal phenomenon, pay attention to regular air supply.